Question 1

Which of the following is not a problem associated with carrier associated signaling (CAS) ?

Accepted Answer

A)   the ease of placing fraudulent calls
B)   the need to turn off the robbed bit signaling function when transmitting high-speed data
C)   the inability to carry signaling messages, with special feature information, between switches or between the switch and the telephone
D)   none of the aboveE) B) and D)
F) A) and B)

Question 2

Each digit on a rotary dial has a defined number of ________ that click when dialed and are interpreted by the switch.

Accepted Answer

The answer of Each digit on a rotary dial has...

Question 3

Why has ISDN received a lukewarm welcome in the United States?

Accepted Answer

A)   costs of end equipment and upgrades
B)   too complicated
C)   equipment failures
D)   too few technicians have studied it sufficiently to establish familiarity
E)   all of the above are factorsF) C) and E)
G) B) and C)

Question 4

________ signaling uses a separate wire pair to carry signaling information, thus requiring a four-wire circuit between switches, one pair for normal voice conversation and the other for signaling.

Accepted Answer

The answer of ________ signaling uses a separate wire pair...

Question 5

ISUP and MTP can function without TCAP or SCCP, and vice versa.

Accepted Answer

A) True 
 B)False

Question 6

Every 800 number has a ten-digit telephone number associated with it and, when called, is routed to that number.

Accepted Answer

A) True 
 B)False

Question 7

Multifrequency (MF) signaling uses multiple ________ to represent the dialed digits.

Accepted Answer

The answer of Multifrequency (MF) signaling uses multiple ________ to...

Question 8

Birds can sit on a power line without being electrocuted because they are not ________ and, therefore, are not creating a complete circuit.

Accepted Answer

The answer of Birds can sit on a power line...

Question 9

The ability to place fraudulent calls, as well as the amount of bandwidth needed to carry the signaling information, are two common problems associated with which form of in-band signaling?

Accepted Answer

A)   single frequency signaling (SF) 
B)   multifrequency signaling (MF) 
C)   ear-to-mouth signaling (E&M) 
D)   all are susceptible to these problems most of the timeE) C) and D)
F) B) and D)

Question 10

ISDN provides a separate signaling channel, the ________ channel, to carry messages between the terminating equipment and the digital switch.

Accepted Answer

The answer of ISDN provides a separate signaling channel, the...

Question 11

Discuss some of the projected capabilities of AIN for the long-term future and tell how these might impact the industry.

Accepted Answer

Artificial Intelligence Network (AIN) is...

Question 12

Carrier associated signaling is a signaling method in which bit sequences from the digital signal represent signaling states.

Accepted Answer

A) True 
 B)False

Question 13

The section of SS-7 protocol that uses the called number and calling number to set up and disconnect the call end to end is the:

Accepted Answer

A)   TACP
B)   SCCP
C)   ISUP
D)   MTPE) C) and D)
F) B) and D)

Exam 10: Signaling

Multifrequency (MF) signaling uses multiple ________ to represent the dialed digits.

Correct Answer
verified

Discuss some of the projected capabilities of AIN for the long-term future and tell how these might impact the industry.

Correct Answer
Answered by ExamLex AI
Artificial Intelligence Network (AIN) is...
View Answer

________ signaling uses a separate wire pair to carry signaling information, thus requiring a four-wire circuit between switches, one pair for normal voice conversation and the other for signaling.

Correct Answer
verified

Carrier associated signaling is a signaling method in which bit sequences from the digital signal represent signaling states.

Correct Answer
verified

Every 800 number has a ten-digit telephone number associated with it and, when called, is routed to that number.

Correct Answer
verified

ISDN provides a separate signaling channel, the ________ channel, to carry messages between the terminating equipment and the digital switch.

Correct Answer
verified

Why has ISDN received a lukewarm welcome in the United States?

Correct Answer
verified

Birds can sit on a power line without being electrocuted because they are not ________ and, therefore, are not creating a complete circuit.

Correct Answer
verified

Each digit on a rotary dial has a defined number of ________ that click when dialed and are interpreted by the switch.

Correct Answer
verified

ISUP and MTP can function without TCAP or SCCP, and vice versa.

Correct Answer
verified

The section of SS-7 protocol that uses the called number and calling number to set up and disconnect the call end to end is the:

Correct Answer
verified

Which of the following is not a problem associated with carrier associated signaling (CAS) ?

Correct Answer
verified

The ability to place fraudulent calls, as well as the amount of bandwidth needed to carry the signaling information, are two common problems associated with which form of in-band signaling?

Correct Answer
verified

Exam 10: Signaling

Multifrequency (MF) signaling uses multiple ________ to represent the dialed digits.

Correct AnswerverifiedShow Answer

Discuss some of the projected capabilities of AIN for the long-term future and tell how these might impact the industry.

Correct AnswerAnswered by ExamLex AIArtificial Intelligence Network (AIN) is...View AnswerShow Answer

________ signaling uses a separate wire pair to carry signaling information, thus requiring a four-wire circuit between switches, one pair for normal voice conversation and the other for signaling.

Correct AnswerverifiedShow Answer

Carrier associated signaling is a signaling method in which bit sequences from the digital signal represent signaling states.

Correct AnswerverifiedShow Answer

Every 800 number has a ten-digit telephone number associated with it and, when called, is routed to that number.

Correct AnswerverifiedShow Answer

ISDN provides a separate signaling channel, the ________ channel, to carry messages between the terminating equipment and the digital switch.

Correct AnswerverifiedShow Answer

Why has ISDN received a lukewarm welcome in the United States?

Correct AnswerverifiedShow Answer

Birds can sit on a power line without being electrocuted because they are not ________ and, therefore, are not creating a complete circuit.

Correct AnswerverifiedShow Answer

Each digit on a rotary dial has a defined number of ________ that click when dialed and are interpreted by the switch.

Correct AnswerverifiedShow Answer

ISUP and MTP can function without TCAP or SCCP, and vice versa.

Correct AnswerverifiedShow Answer

The section of SS-7 protocol that uses the called number and calling number to set up and disconnect the call end to end is the:

Correct AnswerverifiedShow Answer

Which of the following is not a problem associated with carrier associated signaling (CAS) ?

Correct AnswerverifiedShow Answer

The ability to place fraudulent calls, as well as the amount of bandwidth needed to carry the signaling information, are two common problems associated with which form of in-band signaling?

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
Answered by ExamLex AI
Artificial Intelligence Network (AIN) is...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified